|
|
Introduced |
 |
|
|
|
|
| |
Telecontrol Protocol Convert |
|
|
|
Description |
|
|
|
 |
|
| |
Abstract:
E1/RJ45 Protocol Converter is a high-performance self-learning Ethernet bridge. It is used for protocol conversion between Ethernet interface and E1 interface, applying to LAN extension, network Isolation, as well as applying to the access of LAN and WAN and other accessing occasions. The products will be accessed to the telecommunications transmission network, the special network and the WAN as Ethernet data through channel E1
System features:
1. Transparent transmission of Ethernet MAC data 1-4piece of E1 lines supported
2. Conformed to IEEE 802.3 recommendation and (10/100M, full / half-duplex mode)
3. Built-in 10, 000MAC address list, with addresses leaching function
4. WAN interface: E1 (G. 703), G. 704, G. 823
5. Single or concentrated style applied to different conditions
Technical specification:
Ethernet interface parameters
1. Bit rate: 10/100M
2. Interface characteristic: Conformed to IEEE802.3, IEEE802.3u, IEEE802.3x
3. Interface: RJ45
4. No. Of interface: 1
Electrical (2Mb/s interface)
1. Bit rate: 2.048Mbps± 50ppm
2. Line code: HDB3;
3. Nominal impedance: 75Ω unbalanced / 120Ω balanced
4. Standard tolerance: Accord with ITU-TG. 703 Recommendation;
Power supply
1. Power input: DC-48/ +24V/AC220V optional
2. Power consumption: ≤5W
Environment
1. Environmental Temperature: -5--+ 45ºC;
2. Storing Temperature: 40 ºC;~+70 ºC;;
3. Relative humidity: 0~95%;
4. Atmospheric pressure: 86-106Kpa |
|
|
|
|
Contact Us |
|
|
|
| |
Company Name: |
|
|
Chengdu Linkon Communication Device Co., Ltd. |
| |
Company Address: |
|
|
5f-02, Juntong Building, No. 53, Shuangfeng Road, Wuhou District, Chengdu, Sichuan, China |
| |
Telephone: |
|
|
86-28-87054478 |
| |
Full Name (Department): |
|
|
Ms. Angela Deng () |
|
|
|
|
|
[
