|
|
Introduced |
 |
|
|
|
|
|
|
|
Description |
|
|
|
 |
|
| |
Test Standard:
ISO 6803, ISO1436, or Custom-made.
Application:
Impulse, fatigue or pressure alternation test for following objects:
1.Automobile hoses;
2.Hydraulic hoses;
3.Aerospace hoses;
4.Tubing, fitting, air conditioner, filters.
Features:
1. Fully automatic operation controlled by PC plus PLC. Smart data acquisition and analysis enable real time display of pressure values, curves. Data saved automatically while power shortage.
2. More working ports allow more objects to be tested at the same time. Testing data and curve saved automatically.
3. IVS-Test software are approved, easy operation and monitor through the PC friend interface. Test reports provided in graphical and matrix form with hard copies.
4. Adopting the technology of resource saving for pressure supplement by accumulator in order to reduce loading time on motor and pumping system.
5. Automatic control on pressure loading and relief.
6. Safety shut-down automatically against over time, over load and leakage.
7. Designed for manual, semi-automatic, or fully automatic operation
8. Customized clamps are designable by factory
Testing Standard:
(Above testing standard are not applicable out of China.) individual testing stand will be programmed by factory.
Specifications:
1. Test pressure: 120Mpa
2. Pressure precision: 1%
3. Pressure fluctuation: -1% ~+2%
4. Medium temperature: up to 135潞C
5. Timing precision: 0.1%
6. Lift time: more than 10,000,000times
7. Medium: water or hydraulic oil
8. Frequency: 0~1.25Hz |
|
|
|
|
Contact Us |
|
|
|
| |
Company Name: |
|
|
Shenzhen IVS Flow Control Co., Ltd. |
| |
Company Address: |
|
|
Ground Floor, Bldge6, Zhongxing Industry City, Chuangye Rd, Nanshan, Shenzhen, China. |
| |
Province/State: |
|
|
Guangdong |
| |
Telephone: |
|
|
86-755-86069900 |
| |
Full Name (Department): |
|
|
Mr. Jiang () |
|
|
|
|
|
[
