|
|
Introduced |
 |
|
|
|
|
| |
Coaxial Fixed Attenuator (ATS150) |
|
|
|
|
Description |
|
|
|
 |
|
| |
Product Name: Coaxial Fixed Attenuator (ATS150)
Model No: ATS150
I. BRIEF INTRODUCTION:
The coaxial fixed attenuator is used in quantificationally absorbing energy in the transmission wire, expanding power measuring range, controlling power level, also accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer.
The ATS series coaxial fixed attenuator has such features:
Wide operating frequency band, low SWR, flat attenuation value, excellent ability in anti-pulse and anti-burnout.
II. SEPCIFICATIONS:
1. Average Power (Accuracy): 150W (>10%)
2. Peak Power: 10kw (5us)
3. Frequency/Attenuator Value/Accuracy/SWR/Connector
4. Figure: Square
5. Dimension (mm): 285*115*87
6. Figure and Dimension Tolerance: 卤 5%
7. Weight (g): 3380g
III. Application scopeSuitable for microwave measurement aspect (eg. The manufacture and maintenance industry of communications equipment, of microwave components and of RF microwave instrument, the production and manufacture industry of Broadcast television equipment, the microwave measurement industry of higher learning institution or research institute. )
IV. Operating instructions
1. Notice
A. Before using, notice that input power should correspond to attenuator nominal power. If the input power will be higher than the attenuator nominal power, it will cause attenuator's unusefulness and damage.
B. Check if the joints linking size of attenuators meets the requirements before they are allowed to connect, otherwise it will damage components or affect its performance. Pay attention to the input-output port of attenuator before connection, avoid error connection bringing on its damage.
C. When assembling and dismantling attenuator, rotate the nut not attenuator itself, avoid damaging attenuator related components.
D. Prevent attenuator from intense collision, avoid damaging attenuator related components.
2. Operating MethodRotate the nut and directly couple into a corresponding connectors
3. MaintenanceClean the in-out connection port with alcohol, to ensure good contact in course of using.
NOTE:
Connector is discretionally custom-made.
Shape is discretionally custom-made. S
WR varies with the frequency and attenuation value.
Nominal Impedance of all the above products average at 50惟 |
|
|
|
|
Contact Us |
|
|
|
| |
Company Name: |
|
|
Shenzhen Atten Electronics Co., Ltd. |
| |
Company Address: |
|
|
Building A29, Tanglang Industrial Zone, Xili, Nashan |
| |
Province/State: |
|
|
Guangdong |
| |
Telephone: |
|
|
86-755-61618252 |
| |
Full Name (Department): |
|
|
Mrs. D. Rakesh Kumar () |
|
|
|
|
|
[
